AI & ChatGPT searches , social queriess for TRIGGER GUARD
Search references for TRIGGER GUARD. Phrases containing TRIGGER GUARD
See searches and references containing TRIGGER GUARD!
Search references for TRIGGER GUARD. Phrases containing TRIGGER GUARD
See searches and references containing TRIGGER GUARD!TRIGGER GUARD
Firearm part surrounding the trigger to hinder accidental discharge
A trigger guard is a protective loop surrounding the trigger of a firearm designed to prevent unwanted contact with the trigger, which may cause an accidental
Trigger_guard
Component of a firearm action
outline of a trigger guard. 16th century trigger bar In Glock pistols, the trigger bar is a complex 3D-shaped component essential to the trigger system. When
Trigger_bar
Type of semi-automatic pistol
government organizations. Squared off the front of the trigger guard. The squared-off trigger guard protects both the gun and the shooter during hand-to-hand
Beretta_92
Device that reacts to the loss of the operator
further and have a trigger guard built into the handle, similar to firearm safeties. Only when the user presses in the trigger guard first will it then
Dead_man's_switch
17th-century Danish firearm
the style of the magazines. A single forward and back movement of the trigger guard, which could be done in 1–2 seconds, readied the weapon for firing.
Kalthoff_repeater
French bullpup assault rifle
G1 and G2 have a large, grip-length trigger guard like that of the Steyr AUG to allow easy access to the trigger when wearing gloves. Both F1 and G2 models
FAMAS
Semi-automatic rifle
accessible cross-bolt safety located above the trigger. When disassembled, the trigger guard with trigger and safety remains in the stock. Marlin uses their
Marlin_Model_60
1848 revolver by Samuel Colt
Model Dragoon), square back trigger guard, oval-shaped Cylinder Stops] Colt Dragoon 1848 second model, square back trigger guard Colt Dragoon 3rd Model, Colt
Colt_Dragoon_Revolver
Type of semi-automatic pistol
rear to aid grasping. The trigger and trigger guard surfaces also have grooves to reduce finger slip, and the trigger guard is elongated to ease firing
FN_Five-seven
Automatic revolver
not include a mounting point at the front of the frame forward of the trigger guard, and instead had a simple bevel. Late model Unica 6's and Grifones are
Mateba_Autorevolver
Semi-automatic pistol
that were not seen on the Walther P99QA, like the re-designed grip, trigger guard and slide with forward (big) serrations made their combined appearance
Walther_PPQ
Semi-automatic pistol
inspection stamp on the left rear trigger guard web, a factory firing proof Eagle/N on the right rear trigger guard web and at the front of the right
Mauser_HSc
Semi-automatic pistol
government organizations. Squared off the front of the trigger guard. The squared off trigger guard protects both the gun and the shooter during hand-to-hand
Beretta_M9
Semi-automatic pistol
installed just beneath the trigger guard, which forced designers to modify both the pistol's frame and magazine. The trigger guard was equipped with a synthetic
Heckler_&_Koch_P7
Semi-automatic handgun
2nd trigger guard, which has an elongated, oval shape (see photo); in 1992 the frame was redesigned with the shorter, rounder 3rd trigger guard. The
Smith_&_Wesson_Model_1006
Series of semi-automatic pistols
catch-release is located on the left side of the frame, directly behind the trigger guard. After expending the last cartridge from the magazine, the pistol's
Steyr_M
Semi-automatic pistol
magazine release button is ambidextrous and located at the base of the trigger guard. For special operations, the Udav pistol can be equipped with an extended
Udav
Russian assault rifle and variants
is adjustable for length of pull, ergonomic polymer pistol grip and trigger guard unit, and updated rotary dioptre rear sight. At the ARMY-2021 exhibition
AK-12
Gun modification for faster firing
trigger is a device that allows a semi-automatic firearm to fire at an increased rate. The hell-fire clamps to the trigger guard behind the trigger and
Hell-fire_trigger
Type of semi-automatic pistol
mm Short) cartridge. It has a Vertec (straight back) grip, reshaped trigger guard, newly designed grip panels, a skeletonized hammer, a Picatinny rail
Beretta_Cheetah
Weapon
The system consists of a digital camera, a display for the shooter, a trigger guard, and a firing computer capable of locking onto a moving target, analyzing
SMASH_Handheld
American semi-automatic rifle
the front of the trigger guard, easily operated by the trigger finger. It is engaged when it is pressed rearward into the trigger guard, and disengaged
M1_Garand
Semi-automatic carbine
the rear sight. This block is securely locked in place by a swiveling trigger guard. The receiver rigidly attaches to the stock by multiple lugs. The bottom
KelTec_SUB-2000
Finnish assault rifle
slightly modified (trigger guard was reinstated) and adopted as the 7.62 RK 62. The first variant included a hinged trigger guard and no muzzle device
RK_62
Feature on firearms to prevent accidental discharge
Garand created a safety with a metal rocking lever at the front of the trigger guard that is now called the Garand-style safety, used in the Ruger Mini-14
Safety_(firearms)
Revolver
a standard trigger and a trigger guard, but 2000 of these revolvers were made for the Mexican government with the spur trigger and no guard and are referred
Smith_&_Wesson_Model_2
Semi-automatic pistol
were: forward barrel cams in front of the trigger-guard, the sear design marrying the straight pull trigger with a striker-fired system while remaining
Hudson_H9
Series of pump-action shotguns
and Model 590 have polymer trigger guards and safeties, and standard barrels. The Model 590A1 has an aluminum trigger guard and safety, a heavier barrel
Mossberg_500
Gun modification for faster firing
the trigger and clamped onto the trigger guard of a semi-automatic firearm. When the crank is turned, teeth on a gear-like wheel depress the trigger and
Trigger_crank
Semi-automatic pistol
the trigger guard back, which is connected to the slide. This pulling action will retract the slide back against the return spring. When the trigger guard
Type_77_pistol
Shotgun with two parallel barrels
doubles used two triggers, one for each barrel, located front to back inside the trigger guard. The index finger was used to pull either trigger, as having
Double-barreled_shotgun
Sniper rifle
Ordnance trigger guards. In 2007, the Marine Corps began replacing the DD Ross trigger guard assemblies with the M5 detachable magazine trigger guard manufactured
M40_rifle
Semi-automatic rifles
front sight block, making it unable to accept muzzle devices. The trigger and trigger guard of most of the US versions are placed further back on the receiver
Saiga_semi-automatic_rifle
Belgian bullpup assault rifle
the frame, coupled together by means of an axis pin located above the trigger guard. The barrel group has an integral MIL-STD-1913 Picatinny rail used to
FN_F2000
Service revolver
States Armed Forces, including the United States Air Force and the Coast Guard. Until the introduction of the Beretta M9 9mm pistol in 1990, U.S. Army
Smith_&_Wesson_Model_10
Shotgun
Magazine is inserted into bottom of receiver just ahead of trigger guard. - Manual trigger-block safety switch is mounted at top-rear of receiver. - One-piece
Mossberg_185
Bolt action rifle made by Winchester
magazine, machined steel trigger-guard and floor plate, one-piece bolt construction, a relatively short lock time, and a trigger adjustable for pull weight
Winchester_Model_70
Semi-automatic pistol
frame, receiver and slide pivoted forward on a pin in front of the trigger guard. The pistol and its derivatives (Dreyse Model 1907 Pocket Pistol, Dreyse
Dreyse_M1907
Bolt-action rifle
appearance whereby the M48B may be identified is the trigger guard. Whereas previously, the trigger guard/mag well were machined from a solid billet of steel
Zastava_M48
Pistol
shooter to see how much ammunition is left, a rounded hammer, hooked trigger guard, and no front sight. The ASP was responsible for later innovations made
ASP_pistol
Assault rifle
fire selector switch and safety were moved inside the front of the trigger guard. The gun weighed 4.7 kg (10.4 lb), had an overall length of 990 mm (3 ft
AS-44
Semi-automatic pistol
universal accessory rail built into the dust cover in front of the trigger guard that allows for the use of tactical lights, laser pointers and other
Heckler_&_Koch_P2000
Brazilian assault rifle
disassembling the rifle, which is located between the magazine well and the trigger guard,. Despite the polymer stock, the IA2 uses the same folding and locking
IMBEL_IA2
Semi-automatic pistol
and weighed 12.5 ounces. The slide fully covered the barrel, and the trigger guard served as a take-down (disassembly) lever, securing the recoil spring
Walther_Model_8
Compact semi-automatic striker-fired pistol by CZ
to light. The trigger guard is large to fit a variety of finger widths and to allow for shooting while wearing gloves. The trigger guard is undercut for
CZ_P-10
Russian compact assault rifle
is of cross-bolt, push button type and located behind the trigger, inside the trigger guard.[better source needed] The SR-3M is a modernised variant of
SR-3_Vikhr
American inventor
close-range combat; and a “forefinger grip”, today a standard feature on the trigger guard of many modern handguns. Theodore's ASP was the first successful service
Paris_Theodore
Semi-automatic pistol
380 is suited for concealed carry due to its small size and rounded trigger guard. One reviewer calls it "very easy to maintain". The Thunder 380 is quite
Bersa_Thunder_380
Italian selective-fire automatic rifle
feature of the Cei-Rigotti was its trigger, which extended through a slot across the entirety of the trigger guard. It has been theorized that it was
Cei-Rigotti
Austrian bullpup assault rifle
enlarged forward trigger guard completely enclosing the firing hand that allows the rifle to be operated with winter gloves. The trigger is hung permanently
Steyr_AUG
Semi-automatic pistol
redesigned second generation P99 in 2004, incorporating a modified trigger guard that eliminated the "ski hump", which is clearly visible in the accompanying
Walther_P99
Semi-automatic pistol
P-series pistols have an ambidextrous magazine release located behind the trigger guard; it can be pushed forward from either side to eject the magazine. The
Ruger_P_series
Chinese bullpup assault rifle
the handguard to disperse heat, a stronger buttstock and a redesigned trigger guard. The carrying handle was lowered to better position optics on the quick-releasable
QBZ-95
Semi-automatic pistol
matte finish. The Guardsman model has a squared-off trigger guard instead of the rounded trigger guard found on the non-Guardsman model. The Wildey Pistol
Wildey
American Arms maker
trigger rather than using the standard trigger with a guard. Secondly, it uses a side-hammer of earlier design. Lastly, it ditches the trigger guard ejector/plunger
Ethan_Allen_(armsmaker)
Brand of polymer-framed semi-automatic pistols
the frame, and the remaining pair above and in front of the trigger guard. The trigger guard itself is squared off at the front and checkered. The grip
Glock
Sniper rifle
fully adjustable two-stage trigger mechanism that features a new more ergonomic ambidextrous safety lever, and a trigger guard milled from aluminium for
Sako_TRG
Texan gun manufacturer
largely gone unchanged in both design and safety, until Greg Bond added a trigger guard, invented the "rebounding hammer", retractable firing pins, and added
Bond_Arms
Revolver made by Smith & Wesson
semi-polished along with bead-blasted (non checkered) top strap and trigger guard which reduced production cost. The 28 is mechanically identical and
Smith_&_Wesson_Model_28
Assault rifle/Flechette rifle
safety catch is in front of the trigger guard and when activated physically blocks insertion of a finger into the trigger-guard. The rifle features a quick
AAI_ACR
Short-barreled firearm designed to be operated with one hand
introduced in 1962, is a hammer-less, double-action derringer with a half-trigger-guard and a standard break action design. These double-barrel derringers were
Handgun
Revolver
traditional "Colt-style" frame, generally with brass grip straps and trigger guard, and a case-hardened steel frame. In appearance, the frames are almost
Colt Pocket Percussion Revolvers
Colt_Pocket_Percussion_Revolvers
Semi-automatic pistol
compact-capacity magazine. The pistol has a double-action trigger, frame with rounded trigger guard, standard reversible magazine catch, extended beavertail
Tanfoglio_Force
Former American air gun manufacturing company
on to barrel ( 1949 - 1955) • High Comb stock (1950 - 1958) • Slim trigger guard attached with two screws (1949 - 1959). • Forearm is slim style (1949
Sheridan_Products
Semi-automatic pistol
Another issue with the safety was that it is located just above the trigger guard, meaning that it can not be activated with the same hand that is holding
Nambu_pistol
Assault rifle
the trigger guard and the magazine on Type 81 rifles, while on the Type 56 assault rifle the magazine is adjacent to the front of the trigger guard. The
Type_81_assault_rifle
Pump-action shotgun
an internal hammer. It has a trigger disconnector and lock-out bar safety located to the top front of the trigger guard (depressed from the right to left
Winchester_Model_1200
Semi-automatic pistol
below the barrel. The trigger is a single action, internal hammer. A manual safety is located at the front of the trigger guard. To set on Safe, the button
Vektor_CP1
Semi-automatic pistol
grips. The Model 39's magazine release is located at the rear of the trigger guard, a contrast to most European designs which were still using heel releases
Smith_&_Wesson_Model_39
Early automatic rifle
trigger is housed within the trigger guard, and is used to fire in semi-automatic. The LMR utilises an additional trigger located under the trigger guard
Burton_Machine_Rifle
Semi-Automatic Pistol
to the slide manufacturing process. Trigger guard changed from square to round. Much later, the hammer and trigger were changed to being blued instead
Smith_&_Wesson_Model_4506
Semi-automatic pistol
automatic slide stop and magazine release located at the rear of the trigger guard. Colt also introduced the less expensive Challenger model, which came
Colt_Woodsman
Submachine gun
the trigger, within the trigger guard. The safety is of a push-button variety, which is located on the side of the stock forward of the trigger group
M49_submachine_gun
Service revolver
octagonal-barreled version with a folding trigger; and a Type B officer's model, with round-barreled version designed with a trigger guard, The octagonal-barreled version
Bodeo_Model_1889
Polish submachine gun
and prevented from moving. A folding fore grip rests in front of the trigger guard (in the style of the PM-63 RAK), and an optional tactical flashlight/laser
FB_Glauberyt
Revolver
Another feature of many late-model velo-dogs is the lack of a trigger guard, and a trigger that folds into the body of the weapon when not in use. Common
Velo-dog
German bolt action rifle
models only sold in Europe, with the main changes being related to the trigger guard and stock. Sauer 80 was designed in 1970 and introduced to the market
Sauer_90
Early breech-loading rifle
weapon is closed by 11 starting threads on a tapered screw, and the trigger guard serves as the crank to rotate it. One complete turn dropped the screw
Ferguson_rifle
Israeli bullpup assault rifle
the pistol grip with either the standard Tavor Talon trigger guard, a traditional trigger guard, or any compatible third-party accessory. The X95 comes
IWI_Tavor_X95
Semi-automatic pistol
Extended/Reversible Magazine Release Button. Positioned next to the trigger guard for either right- or left-handed shooters. Allowed rapid reloading.
Beretta_92G-SD/96G-SD
Survival gun
with National Firearms Act. The later models have large over-sized trigger guards and Picatinny rails for mounting a wide range of sights and scopes.
Springfield_Armory_M6_Scout
Revolver
little risk of the weapon snagging on clothing. The halved trigger guard facilitates quick trigger acquisition, even for shooters with large fingers or gloves
Colt_Police_Positive_Special
Semi-automatic rifle
15 round detachable box magazine located immediately forward of the trigger guard. In size and handling, it is much like an M1 carbine, though the 1907
Winchester_Model_1907
Semi-automatic pistol
single action operation, large adjustable sights, straight trigger design, a different trigger guard a compensating weight with longer barrel. They were marked
Vektor_SP1
Semi-automatic pistol
compact-capacity magazine. The pistol has a double-action trigger, frame with rounded trigger guard, standard reversible magazine catch, extended beavertail
Tanfoglio_T95
Chilean submachine gun
stock, fore-end, trigger/hammer assembly and floating firing pin design are from the SIG 540. (It also retains the folding trigger guard for winter glove
FAMAE_SAF
Grenade launcher
accommodated above the trigger guard. A front pistol grip is equipped for support and is out of alignment with the rear grip and trigger mechanism, providing
DP-64
Revolver
four screws holding the side plate and one screw at the front of the trigger guard. Four minor design changes were made during the production run of the
Smith_&_Wesson_Model_1905
Semi-automatic pistol
well as hardpoints required for the trigger mechanism. The slide spring guide, safety, trigger, and trigger guard are polymer. The pistol's toothy surface
Grand_Power_K100
Israeli bullpup battle rifle
the pistol grip with either the standard Tavor Talon trigger guard, a traditional trigger guard, or any compatible third-party accessory.[citation needed]
IWI_Tavor_7
Italian semi-automatic pistol
right-side ejection port, and a magazine release located behind the trigger guard. The frame was constructed from an aluminum alloy, and the slide was
Beretta_90
Revolver
to the barrel by a screw. On the double-trigger Tranter revolvers, a second trigger below the trigger guard served to cock the gun. The hammer on this
Tranter_(revolver)
Semi-automatic rifle
capacity, detachable box magazine located immediately forward of the trigger guard. Winchester offered factory chamberings in .32SL and .35 Winchester
Winchester_Model_1905
Multi-purpose pinfire revolver
empty chamber with no cartridge under the hammer, as the weapon has no trigger guard or safety catch. The weapon cannot be aimed accurately because of its
Apache_revolver
Assault rifle
safety / fire selector lever at the left side of the receiver, above the trigger guard. Current production models feature the safety / fire selector lever
9A-91
Sniper rifle
loads). The trigger is two-stage and adjustable. The DSR-1 features a manual, ambidextrous three-position safety, located above the trigger guard. For the
DSR-Precision_DSR-1
Family of Israeli automatic rifles
durability. The only stamped components on the Galil are the magazine-catch, trigger guard, dust cover (on the R5 and R6 the rear handguard-retainer is stamped
IWI_Galil
Spanish arms manufacturer
Additionally the Omni had dual sear bars for improved trigger pull; a trigger safety; finger-contoured trigger guard and a decocking manual safety lever. The wealth
Llama_Firearms
Polymer frame semi-automatic handgun
located forward of the trigger guard. Instead of a manual safety, the 510 includes an integrated trigger safety (the articulated trigger type like the FN FNS)
FN_510
Semi-automatic pistol
that the barrel resided in a low position in the frame just above the trigger guard. The barrel is non-moving and fixed to the frame. It came threaded from
Smith_&_Wesson_Model_422
TRIGGER GUARD
TRIGGER GUARD
Boy/Male
Australian, British, English
Name of an Animal
Male
Norse
Old Norse name derived from the word tryggr, TRYGGR means "trustworthy."
Surname or Lastname
Scottish
Scottish : variant spelling of Biggar.English : occupational name for a builder, from Middle English bigger ‘(house) builder’, an agent derivative of bigge(n) ‘to build’ (from Old Norse byggja).
Girl/Female
Indian, Sanskrit
The Enlightened
Surname or Lastname
English (Kent)
English (Kent) : unexplained.
Boy/Male
English American
Lives near a bridge.
Surname or Lastname
English
English : patronymic from the personal name Trigg.
Boy/Male
English
Lives at tbe bridge.
Boy/Male
Norse
True.
Surname or Lastname
English
English : occupational name for a maker of string or bow strings, from an agent derivative of Middle English streng ‘string’. In Yorkshire, where it is still particularly common, Redmonds argues that the surname may have been connected with iron working, a stringer having operated some form of specialist hearth.
Boy/Male
British, English
Traveler
Boy/Male
American, Australian, British, English
Dwells at the Bridge; Bridge Builder; Lives Near a Bridge
Surname or Lastname
English
English : variant of Bridge.Americanized form of German Brücker (see Brucker).
Boy/Male
Norse
True.
Surname or Lastname
English
English : from the Old Norse byname Triggr meaning ‘trustworthy’, ‘faithful’, a cognate of Trow 1.
Surname or Lastname
English
English : occupational name, probably for a trimmer of cloth. The verb trim is not attested in its modern sense before the early 16th century, but the surname form William le Trymmere is found in the 14th century, and this seems to be continuous with Old English trymian, trymman ‘to strengthen or confirm’ (from trum ‘strong’, ‘firm’).
Boy/Male
Indian
Light bringer
Surname or Lastname
English (of Norman origin)
English (of Norman origin) : from the Old French personal name Reinger, Rainger, composed of the Germanic elements ragin ‘advice’, ‘counsel’ + gÄr, gÄ“r ‘spear’, ‘lance’.English : occupational name for a maker of rings (see Ring 1) or for a bell ringer, from Middle English ring(en) ‘to ring’, Old English hringan.German : occupational name for a turner, someone who made objects by rotating them on a lathe or wheel.
Girl/Female
Muslim
Light bringer
Boy/Male
English
Lives at the Bridge
TRIGGER GUARD
TRIGGER GUARD
Boy/Male
Gujarati, Hindu, Indian, Kannada, Malayalam, Marathi
Name of Brahmaa
Girl/Female
Australian, French, German
Will; Helmet
Boy/Male
Hindu, Indian, Kannada, Telugu
Lively; Manifestation of God
Girl/Female
Hindu, Indian
The Sky's Colour
Boy/Male
Hindu, Indian
Wheat Juice
Girl/Female
Tamil
Soumika | ஸோஂமிகா
Kumbh
Boy/Male
Indian, Punjabi, Sikh
Brave Ruler
Surname or Lastname
English
English : unexplained. Compare Woolery.
Boy/Male
Indian, Sanskrit
Bright Rayed
Girl/Female
American, Australian, British, English
Meadow on a Ledge
TRIGGER GUARD
TRIGGER GUARD
TRIGGER GUARD
TRIGGER GUARD
TRIGGER GUARD
n. & v.
A small fishing vessel, rigged like a yawl.
n.
A fornicator.
a.
Rigged like a ship, that is, having three masts, each with square sails.
n.
A very large and powerful carnivore (Felis tigris) native of Southern Asia and the East Indies. Its back and sides are tawny or rufous yellow, transversely striped with black, the tail is ringed with black, the throat and belly are nearly white. When full grown, it equals or exceeds the lion in size and strength. Called also royal tiger, and Bengal tiger.
a.
Rigged for temporary service. See Jury, a.
n.
A Venetian vessel, with a square stern, having only a mainmast, jigger mast, and bowsprit; also a sloop of war ship-rigged.
n.
A catch to hold the wheel of a carriage on a declivity.
n.
See Jigger.
n.
A great fool; a trifler.
n.
A kind of growl or screech, after cheering; as, three cheers and a tiger.
n.
The jigger. See Jigger.
a.
Having the sails extended upon yards suspended horizontally by the middle, as distinguished from fore-and-aft sails; thus, a ship and a brig are square-rigged vessels.
n.
A cylindrical pulley or drum in machinery.
n.
A trifler; a fribble.
a.
Rigged like a catboat.
n.
A trigger.
n.
A piece, as a lever, which is connected with a catch or detent as a means of releasing it; especially (Firearms), the part of a lock which is moved by the finger to release the cock and discharge the piece.
n.
The trigger fish.
n.
One who rigs or dresses; one whose occupation is to fit the rigging of a ship.
n.
A spring device used in a hair-trigger firearm.