AI & ChatGPT searches , social queriess for SUBFRAME
Search references for SUBFRAME. Phrases containing SUBFRAME
See searches and references containing SUBFRAME!
Search references for SUBFRAME. Phrases containing SUBFRAME
See searches and references containing SUBFRAME!SUBFRAME
Vehicle component
A subframe is a structural component of a vehicle, such as an automobile or an aircraft, that uses a discrete, separate structure within a larger body-on-frame
Subframe
Main supporting structure of a motor vehicle
body shell. Subframes are often found at the front or rear end of cars and are used to attach the suspension to the vehicle. A subframe may also contain
Vehicle_frame
Signals broadcast by GPS satellites
divided into five 6-second subframes of ten 30-bit words each. Each subframe has the GPS time in 6-second increments. Subframe 1 contains the GPS date (week
GPS_signals
Custom motorcycle
the 8-litre V10 engine produces 500 bhp (370 kW) at 4,800rpm. A front subframe mounted to the engine carries the steering and suspension, with the front
Millyard_Viper_V10
Type of motorcycle
engine and initially had a steel frame and subframe in 2001–2002. In 2003 it received an aluminum subframe, which was replaced in the 2006 model with
Yamaha_YZ250F
Prevention of transmission of vibration
compliantly mounted subframe. Above 42 Hz the compliantly mounted subframe is superior, but below that frequency the bolted in subframe is better. Semiactive
Vibration_isolation
Motor vehicle platform
engines and gearboxes mounted transversely on a subframe. Only straight 5 engines were offered. A front subframe and front MacPherson struts were used and either
Volvo_P80_platform
Middle-weight motorcycle
(like the rearsets and radiator). The subframe is also angled up higher than 2004+ models. The different subframe has year-specific parts, such as the
Suzuki_SV650
Professional digital audio interface standard
time slots long to make a subframe of 32 time slots. The 32 time slots of each subframe are assigned as follows: Two subframes (A and B, normally used for
AES3
Motor vehicle
problem involves rusting of the subframe. Most of the corrosion occurs on the passenger side of the subframe. If the subframe collapses while driving, the
Ford_Windstar
Motor vehicle
fibre semi-monocoque is attached to a steel subframe at the front of the chassis, and an aluminium subframe at the rear. The engine, transmission, and
Koenigsegg_CC8S
Automobile construction method using a separate body on a structural frame
Monocoque Skateboard (automotive platform) Semi-monocoque Space frame Subframe Superleggera page 106, George A Oliver, A History of Coachbuilding, Cassell
Body-on-frame
Motorised passenger road vehicle
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Car
Italian car produced from 1972 to 1984
causing the subframe to become loose. Although tales of subframes dropping out of vehicles were simply not true, a vehicle with a loose subframe would fail
Lancia_Beta
Motor vehicle
The car was based on two front Rover Metro subframes, with the steering being locked on the rear subframe, these were fitted to a fibreglass monocoque
GTM_K3
American muscle car
high-performance 5.0 L Coyote V-8 in the base GT V8, but borrowing front and rear subframes from the Shelby GT350 and various parts from it and the Shelby GT 500
Ford_Mustang_Mach_1
Motor vehicle platform
at the back. The bulkhead supported a tubular steel subframe and acted as the firewall. The subframe supported the engine and the rear suspension. The engine
Messerschmitt_Kabinenroller
Fourth generation of the Porsche 911 sports car produced from 1994–1998
and teardrop shaped mirrors. Porsche engineered a new light-alloy rear subframe with an entirely new multi-link coil springs and wishbone rear suspension
Porsche_911_(993)
Motorcycle
available naked FZ6N option). The FZ6 in 2006 has a revised engine, frame, subframe, grabhandle, rear swingarm and wheels are painted in black. It had a metal
Yamaha_FZ6
Automobile door hinged at its opposite side rather than the front
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Suicide_door
Ring-shaped covering around a wheel's rim
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Tire
Automotive chassis based on a central structural tube
concept Frame (vehicle) Body-on-frame Chassis Coachwork Monocoque Spaceframe Subframe Superleggera Swing axle Pfeffer, Prof Dr Peter E. (2017). 8th International
Backbone_chassis
Hard attachment point on a road vehicle, used to tow a trailer
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Tow_hitch
List of components of automobiles
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
List_of_auto_parts
Type of motorcycle
of several pressed and cast aluminum sections welded together. The rear subframe is made of welded square tube aluminum, providing enough strength for a
Kawasaki_Ninja_ZX-7R
Load-bearing framework
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Chassis
Railway Gun
was mounted on a simple box-girder carriage, which was carried on two subframes which were in turn mounted on double bogies. The barrel was mounted in
21_cm_K_12_(E)
Motor vehicle
aluminium 'spine' to which a composite passenger ‘tub’ and front and rear subframes are attached. The ‘spine’ is believed to be the largest single aluminium
Zenos_E10
Type of motorcycle
miles on a single tank. Other notable qualities included its strong rear subframe, 23-litre tank and effective fairing. At the EICMA 2016 the concept bike
Yamaha_XT660Z_Ténéré
Structural design that supports loads through an object's external skin
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Monocoque
Motor vehicle
Pinto, the Mustang II employed an exclusive subframe, isolating its front suspension and engine mount subframe. The steering used a rack-and-pinion design
Ford Mustang (second generation)
Ford_Mustang_(second_generation)
Motor vehicle
for the driver. The engine and five-speed ZF transaxle were mounted on a subframe attached to the floor pan via four flexible mounts, which also helped the
Maserati_Bora
Frame of a motorcycle
other bikes do not use a single frame, but instead have a front and a rear subframe attached to the engine. In the early days, motorcycles were little more
Motorcycle_frame
Series of BMW motorcycles
swingarm to final-drive connection. A host of other updates included a bigger subframe, a new front fork and tubeless rims. The new bikes were produced with engines
BMW_GS_series
Consumer device for making ice, found inside a freezer
the ice. This includes the evaporator and any associated drives/controls/subframe that are directly involved with making and ejecting the ice into storage
Icemaker
Four-door luxury sports sedan
the Quattroporte had a steel unibody structure, complemented by a front subframe. Front suspension was independent, with coil springs and hydraulic dampers
Maserati_Quattroporte
Motor vehicle
Accord Hybrid had an all-aluminum front subframe and rear bumper beam to replace the steel-and-aluminum subframe used on the standard Accord sedan. In terms
Honda Accord (ninth generation)
Honda_Accord_(ninth_generation)
Motor vehicle
the standard fitment. The engines of these early cars were carried in a subframe bolted to the relatively slender ladder chassis. The SA usually carried
Alvis_12/50
American satellite-based radio navigation service
of a 1500-bit-long frame made up of five subframes, each subframe being 300 bits (6 seconds) long. Subframes 4 and 5 are subcommutated 25 times each,
Global_Positioning_System
British sports car
exhaust and torque tube, lightweight lithium-ion battery, 3D printed rear subframe and stripped-back steering wheel. The handling is also reworked by the
Aston_Martin_Valour
Sports car manufactured by Chevrolet (1967-2024)
Camaro was similar to its predecessor. It had a unibody structure, a front subframe, an A-arm front suspension, and leaf springs suspending a solid rear axle
Chevrolet_Camaro
Motor vehicle
with no chassis, using the Mini engine/gearbox and front subframe but replacing the rear subframe with a beam on which the trailing arms were hinged. In
Midas_Cars
Capital and largest city of Amazonas, Brazil
On August 28, 1967, the Manaus Free Trade Zone Authority, SUBFRAME, was created. SUBFRAME is an independent body with its own legal status and assets
Manaus
Type of motorcycle
of several pressed and cast aluminum sections welded together. The rear subframe is made of welded square tube aluminum sections. The double sided aluminum
Kawasaki_Ninja_ZX-9R
Sports car by Radford and Lotus
shares the chassis and engine, the former of which also has a new rear subframe. Jenson Button, former Formula One driver, alongside designer Mark Stubbs
Lotus-Radford_Type_62-2
Motor vehicle
by Yamaha to their Passola moped, using the main frame components as a subframe for attaching to the body of the car. Brakes were converted to hydraulic
Bamby_Cars
Speech coding standard
is 8 kHz with resolution 13 bit, frame length 160 samples (20 ms) and subframe length 40 samples (5 ms). GSM Half Rate is specified in ETSI EN 300 969
Half_Rate
Motor vehicle
bodyshell identical to the Fairlane wagon's). One notable change was the front subframe assembly — as compared with Ford, Chrysler and AMC, in whose cars the entire
Chevrolet_Chevy_II_/_Nova
Grand touring car
unibody structure was complemented by a front tubular subframe supporting the drivetrain and a rear subframe supporting the suspension links and the differential
Maserati_3200_GT
Sound-making device for moving vehicles
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Vehicle_horn
High performance variants of the BMW Z3 and Z4 coupé and roadster
thicker anti-roll bars, stronger semi-trailing arms and a reinforced subframe. When the M roadster switched to the S54 engine (2/01 production), the
BMW_M_Coupé_and_Roadster
Motor vehicle
in that its engine could be removed without a lift. It is mounted on a subframe (which also holds the intercoolers and the radiator) which can be slipped
Maserati_Shamal
Standard motorcycle
famous Z1 from 1972, and achieving so by building a slightly different subframe, tear drop tank and a duckbill tail. The engine is also tuned differently
Kawasaki_Z900
Sports car manufactured by Jaguar Cars from 1961–1974
what was, for the early 1960s, a novel design principle, with a front subframe carrying the engine, front suspension and front bodywork bolted directly
Jaguar_E-Type
Motorcycle model
version. The bike has a steel trellis frame with a cast aluminium seat subframe. The suspension uses high-end inverted forks and an alloy, double-sided
KTM_1190_RC8
Part of an automobile, motorcycle, or other vehicle body that frames a wheel well
rear swingarm and very close to the tire rather than attached to the rear subframe and away from the tire. Conversely, the practice of removing the front
Fender_(vehicle)
Component of steering
passenger's side of the vehicle. The idler arm bolts to the vehicle's frame or subframe. Generally, an idler arm is attached between the opposite side of the center
Idler_arm
Type of automotive suspension design
steered. Lower wishbone It connects the steering knuckle to the vehicle's subframe, indirectly connecting to the vehicle frame. Works in a similar fashion
MacPherson_strut
Type of motorcycle
0 hp) and peak torque now being 39.0 N⋅m (28.8 ft⋅lb). The chassis and subframe were also entirely new. To allow for a bigger airbox, KTM moved the rear
KTM_390_series
Motor vehicle
inspired by the Ferrari Dino. The design is composed of two Mini front subframes, with traditional Mini rubber cone suspension, linked by a sheet steel
GTM_Coupé
Motor vehicle
had designed the 1965 second-generation Corvair. The Camaro shared the subframe / semi-unibody design with the 1968 Chevy II Nova. Almost 80 factory-and
Chevrolet Camaro (first generation)
Chevrolet_Camaro_(first_generation)
Motor vehicle
chassis. In place of the earlier car’s pressed steel subframe the W 153 had an x-shaped oval tube subframe. The car had been developed by Hans Gustav Röhr
Mercedes-Benz_W153
Standard motorcycle
engine and chassis wiring harnesses and minimal bolts attaching the rear subframe, tail lights, and headlight. The R nineT version of the bike has upside-down
BMW_R_nineT
Ability to see in low light conditions
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Night_vision
Sports motorcycle
completely new, but with the same bore and stroke as before. 2008–2010 New subframe, bodywork, and fuel tank. Introduction of new Suzuki Drive Mode Selector
Suzuki_GSX-R600
BMW sports motorcycle
tubular steel, like that of the R1200S, but the latter's tubular rear subframe is discarded in favour of a lightweight self-supporting carbon fibre semi-monococque
BMW_HP2_Sport
Compact crossover SUV manufactured by Honda
generation include a stiffer front subframe and repositioned steering rack to improve feel and accuracy. The rear subframe also gets stiffened to support
Honda_CR-V_(sixth_generation)
Limited edition sports car produced by Lamborghini
retains the carbon-fibre monocoque chassis with aluminium front and rear subframe from the Aventador along with the pushrod suspension system. The interior
Lamborghini_Veneno
Part of automobile
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Trunk_(car)
Special rear wheel covers or spats as used in cars of the 1950s
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Fender_skirts
Motor vehicle
found on the 335i Sport are used throughout the B3 versions. The rear subframe bushings are the same as those found on the 335d, while the secondary springs
Alpina_B3_(E90)
Compact luxury sedan by Acura (2015–2025)
a MacPherson strut arrangement, and loses the TL's all-aluminum front subframe in favor of a lower cost friction stir welded aluminum and steel piece
Acura_TLX
Truck which can tip its bed, dumping its contents
severe service and needs heavy-duty trucks. A Roll-off has a hoist and subframe, but no body, it carries removable containers. The container is loaded
Dump_truck
Japanese motorcycle made beginning 2014
backbone frame. Its rear monoshock unit is placed horizontally within the subframe to give a shorter wheelbase, to save weight and to lower the centre of
Yamaha_MT-07
Vehicle tire resistant to deflation
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Run-flat_tire
Middleweight adventure motorcycle by BMW Motorrad
14 kg (31 lb) lighter and uses a revised steel frame with a narrower rear subframe made of aluminium. The new 895 cc engine, shared with the BMW F900R and
BMW_F900GS
Compact crossover SUV manufactured by Ford
"salt belt" states in the US. Subframe rust can result in the lower control arm mount breaking or detaching from the subframe, resulting in a loss of steering
Ford_Escape
Motor vehicle
suspension and steering, a new dashboard and a modified under bonnet and subframe layout to allow the new generation of XU series engines with 5-speed gearbox
Peugeot_305
Resembling a bicycle with two rear wheels and an engine
and transaxle, popular because it is largely self-contained on a single subframe. Similarly, the engine, transmission and rear wheel may be taken from a
Motorized_tricycle
Finnish agricultural machine manufacturer
Jyväskylä. The first tractors actually used parts of cannon barrel for their subframes. The first tractor model was the Valmet 15, the model number indicating
Valtra
Motor vehicle
labour-intensive; the only way to remove the engine without dropping the suspension subframe was to crane the engine out through the passenger door. A 1974 road test
Commer_FC
Compact SUV by Land Rover, 1997–2015
being Land Rover's first monocoque design, it still featured a substantial subframe with welded, box section rails, giving it extra strength and rigidity.
Land_Rover_Freelander
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Sunroof
automotive parts supplier based in North America. They make components such as subframes, trailing arms, Lower Arm and Pedals for Honda, Toyota and General Motors
F&P_Manufacturing
Motor vehicle
standard GT. Factory upgrades included a lowered suspension (3/4 inch), subframe connectors (used on the convertible models), Tokico shocks, and brakes
Ford Mustang (fourth generation)
Ford_Mustang_(fourth_generation)
Car door hinged at the roof
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Gull-wing_door
Swiss electric heritage locomotive
As a special feature, the locomotive had been fitted with a two axle subframe supporting the brake frame for the electromagnetic rail brakes, which were
Bernina_Railway_Ge_6/6_81
Compact car manufactured by Chevrolet
from the firewall to the subframe holding the engine and front suspension. The design change was intended to prevent subframe movement from affecting steering
Chevrolet_Citation
Type of motorcycle
FCR Flatslide carburettors with TPS, adjustable camshafts, lighter rear subframe combined with single seat unit, front suspension with compression & rebound
Kawasaki_ZXR400
Drag racing truck introduced in 1965
opted to install the drivetrain in the pickup bed, within a welded steel subframe.[citation needed] Parts deemed unnecessary were removed from the body,
Dodge_Little_Red_Wagon
Topics referred to by the same term
Train Radio System, a former GSM-R system Universal Torsion-Resistant Subframe, part of the RMMV HX range of tactical trucks HX3 Utrs., as found in the
UTRS
Type of motorcycle
beam frame, the rear of the seat unit slopes forwards, and the seat unit subframe is totally separate from the main chassis of the bike. The NC23 & NC29
Honda_CBR400
Motor vehicle platform
front suspension arms (wishbone) are attached to a pressed-steel welded subframe, which is directly bolted onto the bodyshell. The design is made to accommodate
Ford_Global_B-car_Platform
Fourth generation of BMW 5 Series
the MacPherson strut, with six-cylinder cars using an aluminium front subframe. Aluminium is used for the steering knuckles, outer strut tube and the
BMW_5_Series_(E39)
Front window of vehicle
Pillar Platform Quarter panel Roof rack Spoiler Stressed member engine Subframe Tonneau Trunk lid Compartments Hood/bonnet Trunk/boot/dickie Doors Butterfly
Windshield
Type of motorcycle
Frame type Chromium-Molybdenum trellis frame, powder-coated with Aluminium subframe Suspension Front: WP USD 48 mm (1.9 in) diameter, 210 mm (8.3 in) travel
KTM_990_Adventure
Type of motorcycle
conventional rear subframe of metal tubing. Instead, the rear-mounted, moulded polyethylene fuel tank has a double role as the rear subframe, carrying the
KTM_690_series
British car model from 1959 to 2000
to use steel subframes to carry the drivetrain and suspension for the front and rear. This also simplified production, as both subframes could be built
Mini
Two-seater sports car
The chassis is composed of a central carbon fiber tub, with aluminium subframes front and rear. The carbon fiber tub is produced by TTA (Tecno Tessile
Alfa_Romeo_4C
Kit car designed and sold by GTM Cars
based on two front Mini subframes attached to a central fibreglass monocoque, with the steering being locked on the rear subframe. A galvanised steel frame
GTM_Rossa
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
Girl/Female
Spanish
Reference to the Nativity.
Girl/Female
Muslim/Islamic
Righteous
Boy/Male
Hindu, Indian, Kannada, Marathi, Sanskrit
Brave
Boy/Male
Hindu, Indian, Traditional
Person who has been Tested; Name of King
Girl/Female
Tamil
Girl/Female
Indian
To be Carefree
Boy/Male
Hindu, Indian, Sanskrit
Doctor
Boy/Male
Anglo, British, Christian, English, German, Hindu, Indian, Teutonic, Traditional
From the Wooden Valley; Powerful; Abbreviation of Oswald; Child of the Forest Valley
Girl/Female
Tamil
Golden creeper
Girl/Female
Hindu, Indian
Graceful
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME