AI & ChatGPT job searches for Drywall taper

Edmonton, AB, Canada

Drywall taper

Location
1424 169 Street SWEdmonton, AB
T6W 3P7
Workplace information
On site
Salary
35.40 hourly / 32 hours per week
Terms of employment
Permanent employment
Full time
Day, Weekend
Starts as soon as possible
vacancies
6 vacancies
Source
Job Bank #3202856
Languages

English

Education
Secondary (high) school graduation certificate
Experience

3 years to less than 5 years

On site

Work must be completed at the physical location. There is no option to work remotely.

Work setting
Various locations
Responsibilities
Tasks
Cut and install metal corner beads to protect exterior corners
Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
Measure, cut, fit and install drywall sheets
Position and secure sheets to metal or wooden studs or joists
Smooth out excess compound and allow coat to dry
Tape over joints using taping machine and embed tape in compound
Additional information
Work conditions and physical capabilities
Bending, crouching, kneeling
Hand-eye co-ordination
Tight deadlines

Apply now: Drywall taper

PLUG

Plug is slang for a shot, blow, or punch. Plug is slang for to shoot with a gun. Plug is slang for to punch or strike.Plug is slang for a tampon.Plug is slang for to have sexual intercourse.Plug was old American slang for a high, tapering silk hat.Plug is American slang for a worthless horse.

RED TAPER

Red taper is British slang for a bureaucrat.

V-Taper

A person with big shoulders and a small waist.

PLUG

Plug is slang for a shot, blow, or punch. Plug is slang for to shoot with a gun. Plug is slang for to punch or strike.Plug is slang for a tampon.Plug is slang for to have sexual intercourse.Plug was old American slang for a high, tapering silk hat.Plug is American slang for a worthless horse.

RED TAPER

Red taper is British slang for a bureaucrat.

V-Taper

A person with big shoulders and a small waist.

When driven fully home, drywall screws countersink their heads slightly into the drywall. They use a 'bugle head', a concave taper, rather than the conventional

primary material used in the drywall industry applied by a tradesperson called a "drywall mechanic," "taper," or "drywall taper." The flexibility and plastic

Stilts are considered a type of scaffold by OSHA in the USA. Stilts are commonly used by drywall tapers working on ceilings.

Soled, Julius (1957), Fasteners handbooks, Reinhold, p. 151. "Fine thread drywall screws". Mutual Screw & Fastener Supply. Retrieved 2011-03-16. Oberg et

shed roofs but is now used less often, replaced by labor-saving plywood. Drywall has become the most common interior wall finishing material and does not

without a "head" on the shank, a piece of round steel sharpened on both ends Drywall (plasterboard) nail – short, hardened, ring-shank nail with a very thin

allow screws to be fitted into masonry walls. In US English, mentions of drywall anchors are sometimes meant (and taken) to refer specifically to the type

materials. Compass saws are suitable for cutting softer woods, plastic, drywall, and non-ferrous metals. The pointed tip of the blade can be used to penetrate

This process is typically called "taping" and those who use drywall are known as "tapers". Veneer plastering covers the entire wall with thin liquid plaster

Other general-use tools include screwdrivers, hammers, reciprocating saws, drywall saws, flashlights, chisels, tongue and groove pliers (Commonly referred