FinanceInsuranceMortgageTechBusinessTravelLegalHealth/FitnessSportsFashionRenovationReviews

Tyres: The Lifeline of The Vehicle

Safety features in vehicles such as seat belt, airbags and Telematics are reliable fail-safe security systems that are great in avoiding an accident but on the other hand, most people just overlook the importance of tyres. It's a known fact that tyres are the lifeline of every vehicle, however, the most common reason for an accident is a defective tyre. So, ignoring the tyre safety is not an option until some manufacturer develops anti wear & tear self-inflating and everlasting super tyre.

Optimism is productive that’s why the car was invented in the first place due to hunger for the invention of an optimist, but on the other hand, pessimists are the ones who developed car safety features because they knew worst will ultimately prevail. So being a little pessimist about your tyre safety will give you leverage over your own and the safety of your loved ones, while you drive on the road with confidence.

Just eyeballing your tyre won’t work you have to be sure about the condition of your tyres via the proper procedure. Even if you have reliable tyre like Cobra Radial G/T you still have to follow the proper procedure of inspecting your tyre safety.

So now the question is, how to ensure tyre safety? what are steps involved in inspecting a tyre? Worry not this article will answer all of your questions, so stay tuned so you can stay safe.

Here are a few tips that are going to help you uphold the lifeline of your vehicle with confidence.

Basic tyre safety tips

 

  • Make sure that your tyre is not old than 6 years. The prescribed timeframe of realistic usability is close to six years.
  • Regularly check the tyre pressure of all of your tyres including the spare.
  • In case you are going on a long trip make sure you check your tyres for pressure according to the users manual
  • Inspect tyres for wear and tear and unusual indications on the tyre. Evacuate bits of glass and other foreign objects stuck in the tyre grooves.
  • Make sure beyond any doubt the all the nuts on the wheels are in contact and tight, as well as that the cap is present on all of the tyre valves.
  • Always check the recommended load rating on your tyre before loading your vehicle so you could avoid overloading.

Inspecting the tyre tread

Nowadays inspecting tyre tread is easy for the majority of the tyres since there are handy tread wear indicators built into the tyre. These tread wear indicators indicate the replacement of the tyre when they are in level with the outside of the tread at more than 3 places. If there is major fluctuation in tread wear than you must visit nearby tyre administration centre.

In case if your tyre does not have any tyre wear indicator or is only at certain parts of the tyre thus making it difficult to assess the tread wear you can use a depth gauge. Following are the depth gauge readings and their respective conduct.

  1. 2/32’’ or less

If the depth gauge reading is 2/32’’ or less then you need to replace the tyre immediately because if not replaced tyre is going to impact the braking system very significantly.

 

  1. 3/32’’ – 4/32’’

If the depth gauge reading is between 3/32’’ – 4/32’’ then you need to consider replacing the tyre because if not replaced tyre is going to impact the braking system significantly but not that much.

 

  1. 5/32’’ or more

If the depth gauge reading is 5/32’’ or more then you are good to go and you do not need a tyre replacement.

 

You can also try the penny test in order to make sure your tyre tread is healthy.

Basic tyre problems and their instant treatment

 

  1. Worn out tread

If the tread on both side or centre of the tyre is worn out evenly more than the usual rate than the problem can be caused due to under or over inflation. To fix this issue, re-adjust the tyre pressure according to the manufacturer's recommendation.

 

  1. Uneven Worn out the tread

If the tyre tread is worn out only on one side or has uneven wear and tear than the issue is wheel alignment, to fix the issue you must get your wheels aligned as soon as possible.

 

  1. Worn out Front tyres

If only the front tyres are worn out then you must be driving on the curves very fast. The troubleshooting of this issue is up to you, you need to drive slowly while taking curves.

 

  1. Loud and abnormal noise

If your tyres are making abnormal and loud noises than either your wheel alignment is off or your shocks are in bad shape. You need to visit a tyre administrator in order to get your wheels aligned or get new shocks.

Most of the problems with the tyre are either related with bad wheel alignment or under & over inflation. These issues can even occur with the most reputable tyres such as Pilot Sport 4S if your vehicle is in bad shape or if you are a vigorous driver.

Conclusion

Follow the above easy tips so you know when to replace the tyre and you never drive with a defective tyre. By always having healthy tyre installed not only you will be saved but also will have optimum driving experience. So always, remember to inspect your tyre regularly.

keep in mind never drive with a bad tyre.

+2
Author's Score
0.2
Up Votes
1
Down Votes
0
Articles
0
Voted on
1 articles
Fonolive.com, #1 Free Social Classifieds
Tags:
Car, Car, car tires, car tires, online car tires, online car tires, safe tires, safe tires, good tires, good tires, vehicles, vehicles,

Recent Articles

Welcome to Muller Subaru Your Chicago Location Subaru Dealer The Muller household has constructed one of...
Do you love spending your weekends outside mowing the lawn? We don’t believe you. Big backyards can easily...
Growing need to increase fuel efficiency, technological advancement, mounting demand for luxurious vehicles, and...
Welcome to Byers Volkswagen For over 120 years, Byers Volkswagen in Columbus, OH has offered top quality services...


Copyrights © 2019 Voticle. All Rights Reserved.